Wires for all other gliders

You can replace all your rigging or as few wires as you like.  It is worth remembering that the BHPA recommend replacing rigging every 100hours or annually.

For the last 16 years Avian have colour coded the terminations of all the rigging wires they produce.  This could be useful if you have Avian wires fitted to your hang glider.  A small patch of colour is stuck on the ferrule underneath the heat shrink.The colour indicates the year of manufacture.   If your wires were Avian produced and have no colour mark on either end of a wire it means that the wires were produced in 2002 (also red tag ) or earlier.  If the heat shrink is missing from the end of the wire an immediate replacement is required.  (Black indicates 2010, Brown 2011)

Front to rear continuous wire Continuous front to rear wire with stop ferrule at the point the wire passes through the lower upright fitting. This sort of wire is generally fitted to Icaro gliders with rubber backed aerofoil uprights. Also fitted to A-I-R gliders with rubber backed aerofoil uprights. £54.99 0 Reviews View  Buy

Full lower rigging for any hang glider Full replacement lower rigging for any hang glider. £155.99 0 Reviews View  Buy

Side wires (2 Lower) Lower side wires for any hang glider. £59.99 0 Reviews View  Buy

Side wires + short wire Two lower side rigging wires plus the short rear wire replaced in a lower rear group of three wires. £79.99 0 Reviews View  Buy

Single wire Single rigging wire for any hang glider. £29.99 0 Reviews View  Buy

Top and bottom rigging (without lufflines) All top and bottom main rigging wires for any hang glider. That is all the primary rigging. Luff lines are important but are not included in with this purchase. Also your glider might have other wires that should be replaced. £270.20 0 Reviews View  Buy