Wires for all Avian gliders

You can replace all your rigging or as few wires as you like.  It is worth remembering that the BHPA recommend replacing rigging every 100hours or annually.

For the last 10 years Avian have colour coded the terminations of all the rigging wires they produce.  A small patch of colour is stuck on the ferrule underneath the heat shrink.The colour indicates the year of manufacture.   If you have no colour mark on either end of a wire it means that the wires were produced in 2002 (also red tag ) or earlier.  If the heat shrink is missing from the end of the wire an immediate replacement is required.  (Black indicates 2010, Brown 2011)

Full lower rigging for Avian hang glider Full replacement lower rigging for an Avian hang glider. £144.99 0 Reviews View  Buy

Side wires (2 Lower) Lower side wires for Avian hang glider. £54.99 0 Reviews View  Buy

Side wires + short piece Two lower side rigging wires plus the short rear wire replaced in a lower rear group of three wires. £74.99 0 Reviews View  Buy

Single wire Single rigging wire for Avian hang glider. £29.99 0 Reviews View  Buy

Top and bottom rigging (without lufflines) All top and bottom main rigging wires for an Avian hang glider. That is all the primary rigging. Luff lines are important but are not included in with this purchase. £249.79 0 Reviews View  Buy