Products meeting the search criteria

1/4" UNF Nyloc Nut. Quarter inch diameter nylon insert lock nut. Unified Fine Thread.

Thin 1/4" UNF Nyloc Nut. Quarter inch diameter nylon insert lock nut. Unified Fine Thread. This nut is far thinner than standard and is quite often used on hang gliders.

4 Fight Cut. (Cut = Cut off tail)

4 Fight Grid Cut. Short tail with extra airflow

Helmet Grid LT Jet

MR-Jet - Visor, no chin guard, long tail

5/16" UNF Nyloc Nut. Quarter inch diameter nylon insert lock nut. Unified Fine Thread.

Stealth KPL 13.2m

Uprights for Airborne Sting 2XC 175

Aerofoil profile upright with rubber back for ease of holding. This upright will Fit a Airborne Sting 2 XC glider with minor modification to casting.

When you are ready to order your glider, please purchase this non-refundable deposit to secure your slot. Please do not place a deposit if you will want to cancel later on.

Protect your ATOS glider from water and damaging road salt with this extra-durable waterproof bag.

Protect your ATOS glider from water and damaging road salt with this pair of extra-durable waterproof bags. To fit glider types ATOS V,N,B,C or VX.

The AIR ATOS VQ 12 is designed to be easier and more fun to fly than the VR, with quicker more agile handling making this glider excellent in thermals. The steady improvement in performance due to the development of the VQ leaves its performance very close indeed to the VR. In thermals the climb rate is often even...[more]

Protect your ATOS glider from water and damaging road salt with this extra-durable waterproof bag.

Protect your ATOS glider from water and damaging road salt with this pair of extra-durable waterproof bags.

The ATOS VR is perhaps the ultimate high-performance hanglider, built for competition and cross-country record breaking.

The ATOS VRS is a smaller version of the ATOS VR. Giving smaller pilots the same performance as the larger size, the VRS is also significantly lighter at just 35kg!

Extra large ATOS, suited for tandem flying, power units or even single pilot flying.

Avian Fly 15 single surface hang glider. Lovely condition, well looked after and very few hours.

When you are ready to order your glider, please purchase this non-refundable deposit to secure your slot. Please do not place a deposit if you might want to cancel later on.

Standard Avian glider bag, as supplied with all new Avian gliders. Very well fitting, with lightweight but durable cloth, choose the right one for your glider and we will send immediately.

High quality Hoodie with Avian Logo.

Avian Speed Bar (Round cross section. 1 1/8"OD) Aluminium speed bar. To fit Avian Rio 2 15, Avian Rio 2 17, Rio 15 Mk 1, Avian Java 140 and Avian Amour 139. This speed bar measures 52" from end to end.

High quality T Shirt with Avian Logo.

Ball-lock pins or 'Pip-pins' are used on many gliders for quick attachments, such as base-bar pins or nose catch pins. More complex, than the simple wizz pins but very fast, neat and reliable to use. Different lengths are available. Please make sure you understand the 'working lengths' so that you order the correct...[more]

A comfortable front loading pod style harness, aerodynamic and a perfect fit!

Avian logo with hang glider sticker, ideal for car windows or bumpers, vans, etc.

At Avian we have all the right facilities to professionally repair carbon fibre components. We can easily service cracked or broken ribs, preserving the glider's trim settings.

Solar Wings lower left side upright casting. This fitting inserts into the upright and has NO slot for fitting a VG pulley. This casting will fit many Avian and Solar Wings hang gliders. All Amours, Javas. Most Rio 15 (mk1s) and early Cheetahs. It will also fit Solar Wings Rumours, Scandals and Scandal XK...[more]

Solar Wings lower right VG side upright casting. This fitting inserts into the upright and has a slot for fitting a VG pulley. This casting will fit many Avian and Solar Wings hang gliders. All Java Gliders and early Cheetahs. It will also fit Solar Wings Rumours, Scandals and Scandal XK gliders.

Speed upright / downtube for hang gliders with SPEED low drag control frame. For example gliders such as Avian Evo 3, Evo 2, Evo, Cheetah, Puma etc.

The Woody Valley Cosmic hang gliding harness is sold as an "intermediate" harness. It has most of the features of the most expensive harness and will suit pilots from beginner right through to those flying in competitions. The harness is made to measure fitting fit like a glove. This harness features a pointed tail...[more]

Batten profile for all current Avian gliders.

A glider bag made to measure for your wing, from special lightweight cloth that will pack easily into your harness when you fly cross-country. Printed with any design of your choice.

A glider bag made to measure for your wing, from special lightweight cloth that will pack easily into your harness when you fly cross-country.

Book your glider in now. The booking fee is knocked off the price of the strip down when the total is calculated.

The Fly single-surface is the lightest and most user-friendly glider we have ever made. Perfectly suited for new pilots or simply those looking for a lighter wing to complement their high performance glider, the Fly is all about having fun. Quick to rig, easy to fly and wonderfully nimble in the air this is a glider...[more]

Supine variant of our Fly single-surface. Clip in with any standard paraglider harness and enjoy some laid-back flying.

The larger size of our Fly single-surface. Perfect for heavier pilots or for use with power units, this is a great, fun glider that any pilot can enjoy.

Supine version of our Fly 17. Enjoy your flying in serene comfort!

We can easily upgrade your Avian Fly to a Rio 2 with a new sail and fresh wires, giving you much improved performance for less than half the price of a new glider!

Continuous front to rear wire with stop ferrule at the point the wire passes through the lower upright fitting. This sort of wire is generally fitted to Icaro gliders with rubber backed aerofoil uprights. Also fitted to A-I-R gliders with rubber backed aerofoil uprights.

Full replacement lower rigging for any hang glider.

Full replacement lower rigging for an Avian hang glider.

Standard glider tie with plastic buckle

A high performance racing harness which can have literally any graphic design - if you can imagine it, X Wings can print it!

Icaro's topless design, the Laminar, has a remarkable history in international competition. This is no surprise when you consider their design pedigree, with input from world champions Manfred Ruhmer, Christian Ciech and Alex Ploner, who all fly Laminar wings.

6mm diameter hole Nyloc nut. M6 Nyloc nut with blue insert.

8mm diameter hole Nyloc nut. M8 Nyloc nut with blue insert.

Steel Maillon for attaching parachute bridle to harness. This very strong metal loop is the accepted method for attachment to the harness.

MastR - the Laminar with a kingpost A glider for advanced pilots who do not want to fly a kingpostless glider Certification DHV 3

Batten profile for out of production gliders.

This deposit will book your wing in to us for a professional quality repair, where we will be able to assess the extent of the damage and provide a quotation for the work. Typical repairs include cracks on the spar and damage to the flaps. We will advise on your options for repair or replacement.

Pair (2) sets of wheel halves, hubs and bag (red bag shown). These parts assemble to make two landing wheels to fit on an airfoil speedbar. The hubs are available in two designs; to fit aerofoil aluminium speed bars: Avian, Moyes, Airborne section or Wills Wing section.

Pair (2) sets of wheel halves and hubs to make two landing wheels to fit on a round 1 1/8" speedbar.

At Avian we can air out and repack your reserve parachute to ensure that it opens reliably if you have to use it. This is a good thing to arrange while your glider is in for servicing, so you don't miss any of those precious flying days!

An almost new Avian Puma 13.5. A high performance kingposted glider in perfect condition and loaded with options!

Avian Puma 13.5 High Performance hang glider. At last a truely high performance kingpost glider.

High Energy Quantum Series 330. Pulled down apex emergency reserve parachute.

High Energy Quantum Series (QS) 440. Pulled down apex reserve hang gliding or paragliding parachute.

Book your glider in now. The booking fee is knocked off the price of the strip down when the total is calculated.

The new Rio 2 is the latest Club/sports hang glider from Avian. The Rio 2 is even more user friendly. It is easier and quicker to rig, easy to fly and easier to land. Of-course, with a totally new airframe and all new fittings, it looks smarter on the ground as well as cleaner in the air.

The new Rio 2 is the latest Club/sports hang glider from Avian. The Rio 2 is even more user friendly. It is easier and quicker to rig, easy to fly and easier to land. Of-course, with a totally new airframe and all new fittings, it looks smarter on the ground as well as cleaner in the air.

Lower side wires for any hang glider.

Lower side wires for Avian hang glider.

Two lower side rigging wires plus the short rear wire replaced in a lower rear group of three wires.

Two lower side rigging wires plus the short rear wire replaced in a lower rear group of three wires.

Single rigging wire for any hang glider.

Single rigging wire for Avian hang glider.

Single wire, made to specified length.

A high performance racing harness, sleek, aerodynamic and a perfect fit!

Aerofoil profile upright with rubber back for Solar Wings Hang Gliders. This upright will fit a Solar Wings Rumour 13.5, Solar Wings Rumour 14.5. Solar Wings Scandal and Solar Wings Scandal XK.

This Spreader bar and integral webbing is of a unique design with two independent suspension webbing supports. It is also unique in that the webbing is not screwed or riveted to the aluminium spreader often a source of damage and wear. These two design features make this spreader set up safer. In addition the...[more]

Standard length backup hang loop, as fitted to new Fly and Rio 2 gliders. Will suit harnesses with DHV-standard length mains.

The Mosquito NRG is the sleekest powered harness you can buy, offering an effective solution for powered hangglider flight. It now comes with the new tuned exhaust pipe as standard.

All top and bottom main rigging wires for an Avian hang glider. That is all the primary rigging. Luff lines are important but are not included in with this purchase.

All top and bottom main rigging wires for any hang glider. That is all the primary rigging. Luff lines are important but are not included in with this purchase. Also your glider might have other wires that should be replaced.

A simple knee hanger type harness, perfect for training schools or for taking passengers on a tandem, or just for some lightweight easy flying (dune gooning for example!)

Icaro upright adapter for continuous front to rear rigging type upright. These often get distorted with when uprights are bent. Easy to replace. Fit Icaro Gliders Fit A-I-R gliders. Fit any gliders with this upright system.

Aerofoil profile upright with rubber back for small gliders (quite rare). This upright will fit the Amour 139 and the Java 140.

Aerofoil profile upright with rubber back for ease of holding. This upright will Fit a Rio 15 (Mk 1) Java 155, 150, Java Comp 150. It will also fit some early versions of the Cheetah 160 and Cheetah 150.

Aerofoil profile upright with rubber back. This upright will fit a Rio 2, both 15m and 17m versions. It will also fit the fly in both 15m and 17m versions. It will also fit some rare later versions of the Rio 15 (mk1) with silver fittings as shown in the photograph.

A universal instrument (vario) clamp that fits all tube sizes used on a hang glider and most rubber backed aerofoil upright sizes.

Icaro wire stop for continuous front to rear rigging. These often get a bit worn and distorted with age. Cheap and easy to replace. Fit Icaro Gliders Fit A-I-R gliders. Fit any gliders with this upright system.